The YouTube channel DIY Builder has published and created a DIY Arduino laser engraver which is powered by an Arduino Nano development board and is fitted with a 200-250mW 650nm Laser Module ...

Download the codes here Arduino simple shield potentiometer code: Arduino shield rc car: Arduino nano module L298P code: Board project: In this project you'll see how simple it is to make an rc car ...

This module allows you to develop a timing system, which utilizes the Arduino’s fast internal clock to provide an accurate timing system for kinematic experiments. Also, this module focuses on how to ...

Light fidelity (Li-Fi) is a widely adopted form of wireless communication that uses optical energy to verify device ...

The Arduino illuminates (blasts) the target using an inexpensive laser diode mounted on a servo motor. Interesting applications of applied math include computing distance based on sonic travel time, ...

An Arduino was added to control the motor and provide safety interlocks to make sure the laser fires only when the mirror is up to speed. The effect of the deep ruby red laser cutting through ...

You'll need an Arduino, of course, and you'll also need a pair of laser pointers, a few servos and motors to make the lasers move as time passes, and of course, the IKEA BLANDA salad bowl ...

Jon Bumstead has created an awesome Arduino powered 13 note midi harp after receiving funding from the optics group Spectra at Washington University in Saint Louis.

The laser tower is glued to an Arduino board and attached to a laser module, all enclosed in an old Altoids box. The tower is composed of two SG90 micro servos, attached to a pan / tilt camera ...

When the Arduino senses a state change from one of the photocell, meaning the beam of light has been interrupted, it plays the appropriate wave file stored on an external JQ6500 sound module.